Buckle pump cover buckle after the pump cover, tighten the pump gland bolts combined bearing body and both sides. Then, the disk moving rotor to see whether or not different from the past, 350s44 double suction pump, if there is no obvious abnormalities, double suction pump, you can connect the air pipes, sealing water pipes on the packing and better, then, you can make couplet the axle alignment of the pump vibrations approach: ⑴, re-alignment, meet the technical requirements: a shaft diameter of 0.05 0.10mm.⑵, fastening bolt, 250s65 double suction pump, re-grouting or precast foundation necessary. ⑶, a, large open inlet valve, b, purge inlet filter. C, re-prime the pump. D, vented. E, to check whether there is leakage phenomenon inlet line. ⑷, school or replace the pump shaft axis (5) to take appropriate measures to eliminate cavitation, to achieve a smooth run (6) to open a large inlet valve or check the Clean the filter and into the water. (7) to find reasons to re-find balance or Fact of replacement parts. (8) The replacement of the same type bearing double suction pump _ Chengyu pump double suction pump provided _32sap12 manufactured by Hebei Cheng Yu Pump Co., Ltd.. _ Chengyu double suction pump suction pump double pump _32sap12 Hebei Yu Cheng Pump Manufacturing Co. (www.chengyubengye.com) (www.chengyubengye.com) this year introduced a new upgrade, the above picture is for reference only, please call Tel This page or image on to obtain the latest information, Contact: Zhang.